You are not signed in.

Intelesense User Forums

Sensor Questions: Hach SC1000

  1.  

1 to 2 of 2

    • CommentAuthorWaterOne
    • CommentTimeMar 29th 2008
     
    The Hach sc1000 controller is a very versatile device used in water treatment plant. Will your equipment work with the Hach sc1000?
    •  
      CommentAuthorcarsten
    • CommentTimeMay 6th 2008
     
    We have not used the sc1000 before, but since it features 4-20mA outputs, our InteleCells should be able to interface to it (the InteleCell has two 4-20mA inputs).
    The other option is to interface to the sc1000 via its RS-485 port. This would require firmware support on the InteleCell side, and it is something we could potentially implement. This type of interface may be required to make full use of all the features of the sc100, e.g. its relays etc.
    If you have a specific project in mind for which you are considering our InteleCell system, please feel free to contact us at support@intelesense.net and one of our engineers will get in touch with you.
  1.  

1 to 2 of 2